Your Position : home >Products > Fiber Optic Active Devices > Optical Transceiver > 100G Optical Transceiver
Products
-
5G System
- Fiber Optic Cable System
- Fiber Cable Distribution System
- FTTH System
-
Patch Cord Production Line
- Fiber Stripping Machine
- Cable Stripping Machine
- Fiber Optic Cutting Machine
- Fiber Optic Polishing Machine
- Fiber Optic Polishing Fixture
- Fiber Optic Heating Oven
- Fiber Optic Crimping Machine
- Fiber Optic Epoxy Injection Machine
- Fiber Optic Microscope
- Pre-Assembly Tools
- IL&RL Testing Machine
- Ultro-sonic cleaning machine
- Interferometer Testing Machine
- Polishing Consumables
- Fiber Stripping Machine
- Fiber Optic Active Devices
-
Optical Cable Pulling machine
<
>
100Gb/s 10km CFP Optical Transceiver
Application:
1.OTN-OTU4
2.Switch to switch interface
3.Switch to router interface
4.P to P Access Network
2.Switch to switch interface
3.Switch to router interface
4.P to P Access Network
Characteristics:
1.Direct LC receptacle optical interface
2.Single +3.3V power supply
3.Hot-pluggable
4.Operating optical data rate up to 112Gbps
5.Operating electrical serial data rate up to 10.3125Gbps
6.10 parallel electrical serial interface
7.Transmission distance up to 10km
8.AC coupling of CML signals
9.1310 nm window cooled EA-DFB LD
10.PIN ROSA
11.Low power dissipation(Max:16W)
12.Built in digital diagnostic function
13.Operating case temperature range:0℃ to 70℃
14.Compliant with RoHS
15.MDIO Communication Interface
2.Single +3.3V power supply
3.Hot-pluggable
4.Operating optical data rate up to 112Gbps
5.Operating electrical serial data rate up to 10.3125Gbps
6.10 parallel electrical serial interface
7.Transmission distance up to 10km
8.AC coupling of CML signals
9.1310 nm window cooled EA-DFB LD
10.PIN ROSA
11.Low power dissipation(Max:16W)
12.Built in digital diagnostic function
13.Operating case temperature range:0℃ to 70℃
14.Compliant with RoHS
15.MDIO Communication Interface
Ordering Information
Part Number | Product Description |
FYCP-4LO4-10BD | CFP: 1310nm-LAN-Cooled-EMA DFB-LD, 103.125Gbps, 10km, 0?C ~ +70?C, Ethernet Version, DDM |
Absolute Maximum Ratings
Parameter | Symbol | Min | Max |
Storage Temperature Range(℃) | Ts | -40 | +85 |
Relative Humidity(%) | RH | 5 | 85 |
Power Supply Voltage(V) | Vcc | -0.5 | +3.6 |
Operating Case Temperature Range(℃) | Tc | -5 | +75 |
Receiver Damage Threshold Per Lane(dBm) | Pdag | +5.5 | - |
Recommended Operating Conditions
Parameter | Symbol | Min | Typ | Max |
Operating Case Temperature Range(℃) | Tc | 0 |
|
70 |
Power Supply Voltage(V) | Vcc | 3.2 | 3.3 | 3.4 |
Data rate(Gb/s) |
|
|
103.125 | 112 |
Specifications (tested under recommended operating conditions, unless otherwise noted)
Parameter | Symbol | Min | Typ | Max | Notes |
Launched power (avg.) is power coupled into a single mode fiber with master connector.(Before of Life) | |||||
Signaling Rate for Each Lane(100GbE)(Gbps) |
|
- | 25.78125 |
|
|
Signaling Rate for Each Lane(OTU4)(Gbps) |
|
- | 27.95249 |
|
|
Four Lane Wavelength Range(nm) | λ1 | 1294.53 | 1295.56 | 1296.59 |
|
λ2 | 1299.02 | 1300.05 | 1301.09 |
|
|
λ3 | 1303.54 | 1304.58 | 1305.63 |
|
|
λ4 | 1308.09 | 1308.09 | 1310.19 |
|
|
Side Mode Suppression Ratio(dB) | SMSR | 30 |
|
- |
|
Total Average Launch Power(dBm) | Pt | - |
|
10.5 |
|
Average Launch Power for Each Lane(100GbE)(dBm) | Pa | -4.3 |
|
+4.5 | 2 |
Average Launch Power for Each Lane(OTU4)(dBm) | -2.9 |
|
+4.5 |
|
|
Optical Modulation Amplitude for Each Lane(dBm) | OMA | -1.3 |
|
4.5 | 3 |
Transmitter and Dispersion Penalty for Each Lanes(TDP) |
|
|
|
2.2 |
|
Extinction Ratio (100GbE)(dB) | EX | 4 |
|
|
|
Extinction Ratio (OTU4)(dB) | 7 |
|
|
|
|
RIN20OMA(dB/Hz) |
|
|
|
-130 |
|
Optical Return Loss Tolerance(dB) |
|
|
|
20 |
|
Transmitter Reflectance(dB) |
|
|
|
-12 |
|
Eye Diagram | Compliant with IEEE 802.3ba-LR4/OTU4 |