english
chinese
Your Position : home >Products > Patch Cord Production Line > Fiber Optic Polishing Machine > Square Pressure Fiber Optic Polishing Machine
Products
-
5G System
- Fiber Optic Cable System
- Fiber Cable Distribution System
- FTTH System
-
Patch Cord Production Line
- Fiber Stripping Machine
- Cable Stripping Machine
- Fiber Optic Cutting Machine
- Fiber Optic Polishing Machine
- Fiber Optic Polishing Fixture
- Fiber Optic Heating Oven
- Fiber Optic Crimping Machine
- Fiber Optic Epoxy Injection Machine
- Fiber Optic Microscope
- Pre-Assembly Tools
- IL&RL Testing Machine
- Ultro-sonic cleaning machine
- Interferometer Testing Machine
- Polishing Consumables
- Fiber Stripping Machine
- Fiber Optic Active Devices
-
Optical Cable Pulling machine
<
>
WT-20A Square Pressure Polishing Machine
Application:
This Square Pressure Fiber Optic Polishing Machine strength controlled by four angle, thus the pressure is more precise to control and the final products has higher precision. For PC terminations above 95% could pass 3D interferometer test, while for APC terminations this rate keep 90%. Each polishing jig for this machine is available as LC,SC, ST,FC,MTRJ,E2000 PC connector as well as angle polishing. May process each kind of standard fiber optic connectors, such as FC/UPC/APC,SC/UPC/APC, ST/UPC/APC, LC/UPC/APC, ,MU/UPC/APC, MTRJ,E2000/UPC/APC etc.
Characteristics:
1. Convenience for adjusting pressure, unloading and replacing jigs.
2. Excellent connector and face polishing quality, the percentage of products sent back for repair is very low.
3. Save material and low cost for grinding.
4. Easy to use and stable.
5. Display grinding speed which can be adjusted any time.
6. Control the direction with pro and con, convenience for Adjustment.
7. Toothed gearing, more stable and deep-set.
2. Excellent connector and face polishing quality, the percentage of products sent back for repair is very low.
3. Save material and low cost for grinding.
4. Easy to use and stable.
5. Display grinding speed which can be adjusted any time.
6. Control the direction with pro and con, convenience for Adjustment.
7. Toothed gearing, more stable and deep-set.
How to use Square Pressure Polishing Machine to make fiber patch cord? click below to learn more
For your information, the square pressure fiber optic polishing machine no need to change the pressure, specially designed for the freshman.
This is a layout to show you how to establish a fiber patch cord production line. Click below, then you will see the video for real production scene.
Package
Polishing jigs for Square pressure polishing machine
Package Size
39cm*31cm*37cm
Gross Weight
27kg
P/N
Description
SP-J-LC/P-24
LC/PC Connector housing polishing jig for SP-20 24 position
SP-J-LC/P-40
LC/PC Connector housing polishing jig for SP-20 20 position
SP-J-SC/P-20
SC/PC Connector housing polishing jig for SP-20 20 position
SP-J-SC/P-24
SC/PC Connector housing polishing jig for SP-20 24 position
SP-J-FC/P-20
FC/PC Connector housing polishing jig for SP-20 20 position
SP-J-FC/P-24
FC/PC Connector housing polishing jig for SP-20 24 position
SP-J-ST/P-20
ST/PC Connector housing polishing jig for SP-20 20 position
SP-J-ST/P-24
ST/PC Connector housing polishing jig for SP-20 24 position
SP-J-MU/P-24
MU/PC Connector housing polishing jig for SP-20 24 position
SP-J-MU/P-40
MU/PC Connector housing polishing jig for SP-20 40 position
SP-J-LC/A-20
LC/APC Connector housing polishing jig for SP-20 20 position
SP-J-SC/A-18
SC/APC Connector housing polishing jig for SP-20 18 position
SP-J-FC/A-18
FC/APC Connector housing polishing jig for SP-20 18 position
SP-J-MJ-18
MTRJ connector polishing jig for SP-20 18 position
SP-J-MP-18
MPO connector polishing jig for SP-20 18 position
SP-J-125/P-20
1.25mm PC ferrule polishing jig for SP-20 20 position
SP-J-125/A-20
1.25mm APC ferrule polishing jig for SP-20 20 position
SP-J-250/P-18
2.5mm PC ferrule polishing jig for SP-20 20 position
SP-J-250/A-18
2.5mm APC ferrule polishing jig for SP-20 20 position
The other type square pressure fiber optic polishing machine for your reference, Model No.: WT-CX-20C,which can change the rotation speed during fiber patch cord production.
Technical Parameter
Machine Size
L 240(mm) × W 240(mm) × H 260(mm)
O.D. of Rotation Plate
127 mm（5 inch）
Time Settings
99 min 99 sec (Max)
Speed for Rotation Plate
90 rpm
Height of Plate Jumpiness
<10 um
Pressure Configuration
21 ~ 36 N/cm2
Work Temperature
10 ~ 40 Celsius degrees
Relative Humidity
15%~85%
Noise
unloading Less 50 dB
Libration
Working Status 0.25g 5~100Hz 10min
Stopping Status 0.50g 5~100Hz 10min
Power Input
220～230 VAC 50Hz/60Hz
Electric Power
40 W
Net Weight
24 kg
Storage Condition
Temperature
-40 ~ 80 Celsius degrees
Relative Humidity
15%~85%
Libration
1.0g 5~100Hz 45min
If you are experienced at the fiber polishing skills, there is a cost effective choice for you----central pressure fiber optic polishing machine, Model No. WT-CP-12, equipped with pansonic motor, Click below picture to learn more
